Your New Heat Pump: Ask for a Controls Demonstration Before Handover

  1. HVAC installation
  2. Heat pumps
  3. Your New Heat Pump: Ask for a Controls Demonstration Before Handover

A new heat pump is easier to live with when someone explains its controls in your own home. Before the installer finishes, set aside time for a demonstration and make a short operating note. The aim is to know what the system is intended to do, how to use everyday settings and whom to call with questions.

Identify the rooms and equipment served

Start by asking which areas the heat pump heats and cools, and whether another heating system remains in use. The Consortium for Energy Efficiency's new-owner guide, hosted by the Department of Energy, recommends confirming system coverage, backup-heating arrangements and thermostat settings with the contractor.

Write the equipment and controller model numbers on the same page. If several indoor units have separate remotes, label your notes by room so the instructions do not get mixed together.

Practice the settings you will actually use

Ask the installer to demonstrate heating, cooling, fan settings and schedule changes on your particular controller. Then perform those everyday actions yourself while the installer watches. Ask what the display should show during normal operation and where to find explanations of unfamiliar symbols.

The CEE guide cautions against abrupt temperature changes and discusses steady settings for heat-pump operation. Rather than copying the schedule from your previous heating system, request a recommended starting schedule for this installation. Ask how backup heat is controlled before changing advanced settings.

Create a short handover note

A useful record includes the normal operating mode, agreed starting settings, manual location and service contact. Add any instructions for extended absences and the procedure for restoring ordinary operation afterward. Keep a copy where other household members can find it.

For the broader project context, read our guide to heat-pump installation and maintenance. Use the manufacturer's instructions for the precise controls and maintenance requirements of your equipment.

Agree on the follow-up process

Ask how to report a comfort problem after living with the system. Useful notes may include the room, time, displayed setting and what felt different. Record observations without opening equipment or altering installer-only menus. Finish the handover knowing which adjustments are intended for the homeowner and which belong with the service technician.